Spring is a time of renewal and rejuvenation not just for nature but also for your home and the equipment you rely on. Among these is your generator. To ensure yours is ready when you need it, spring maintenance is essential. This guide outlines the necessary tasks for maintaining the functionality of your generator to guarantee its reliability throughout the year.
Visual Inspection
Begin with a thorough visual inspection of your generator. Look for any signs of wear and tear, such as rust, loose components, or damage. Check the exterior for dents or scratches that might indicate past problems. This initial step helps identify issues that could lead to bigger problems if left unattended.
Cleaning Tasks
Dirt and debris can hinder the performance of your generator. Ensure the area around the generator is clean and free from materials that could obstruct airflow or harbor moisture, which can lead to rust. Use a soft cloth to wipe down the exterior and pay special attention to remove any build-up that might block vents or cooling fins.
Check Your Fuel System
The fuel system requires careful attention. Start by checking the fuel level and refilling it if necessary. If your generator uses gasoline, consider adding a fuel stabilizer to prevent the fuel from deteriorating during extended periods of inactivity. For diesel generators, inspect the fuel filters and replace them if they are dirty or clogged.
Check the Oil and Filter
Changing the oil and oil filter is pivotal to making sure your generator performs optimally. Old oil can contain contaminants that wear down engine parts. Refer to your generator manual for the recommended oil type and change frequency. It is advisable to change the oil after every 100 hours of use or at least once a year.
Battery Care
A generator battery must be in good condition to ensure the unit starts when needed. Check the battery charge level and look for signs of corrosion on the terminals. Have a professional clean the terminals if necessary and tighten any loose connections. If the battery is old or not holding a charge, replace it.
Inspect the Cooling System
Generators generate a lot of heat while running. The cooling system helps manage this heat to prevent the engine from overheating. Check the coolant level in the radiator and refill it if it is low. Inspect the radiator for leaks or damage and clean any debris that may block airflow.
Schedule Maintenance
Even though there are tasks you can perform yourself, nothing beats professional maintenance. The professional can thoroughly examine your generator to spot and fix small problems before they balloon out of control. You should have an inspection performed annually.
Taking the time to perform these essential spring-cleaning tasks on your generator can save you from unexpected power outages and costly repairs in the future. Schedule generator maintenance this spring in El Paso, TX by calling Secure Contractors.